James Hardie Fiber Cement Siding
Crisp shadow lines in the late afternoon. Color that still looks deliberate years from now. James Hardie fiber cement gives a Puget Sound home that freshly finished look and keeps it, because it does not rot, feed insects, or burn.
James Hardie Fiber Cement Siding for Puget Sound Homes
Crisp lines and rich factory color that stay beautiful for decades, installed to the manufacturer schedule so the warranty holds. Get a free home estimate with real samples on your wall.
Trusted by Puget Sound homeowners
- 5.0 Rating On Google
- Recommended On Facebook
- Reviewed On Yelp
Beautiful Today, and Still Beautiful Decades From Now
James Hardie fiber cement is cement, sand, and cellulose fiber pressed into board. That composition is the whole story: there is nothing in it for water to swell, for carpenter ants to eat, or for a stray ember to catch. In a climate that stays damp from October through May, that matters more here than almost anywhere else in the country.
It comes in lap, panel, shingle, and trim, in smooth or a pressed wood grain, and either prefinished at the factory or primed for paint on site. Prefinished costs more up front and buys you a much longer run before the first repaint, which is usually the better math on a house you plan to keep.
Work With Us
Why James Hardie Fiber Cement Is the Top Choice for Puget Sound Homes
The best choice for fiber cement siding installation in greater Seattle
The catch is that fiber cement is unforgiving of a sloppy install. It is heavy, it has to be cut with the right blade and dust control, and its clearance and fastening requirements are not suggestions. Get those wrong and the warranty is gone before the scaffolding comes down.
Work With UsFour Ways to Wear It
Most houses use one profile in the field of the wall and a second on the gables. We mock up the combination before anything is ordered.
-
Lap Siding
The classic horizontal board, in exposures from about four to eight inches and in smooth or wood grain textures. A narrower exposure reads traditional, a wider one reads clean and modern. It is the most common fiber cement wall in the Northwest, and the one that suits almost any house.
Get a Free Estimate -
Board & Batten Siding
Wide vertical panels with narrow battens fastened over the seams, laid out so every batten lands on solid backing. The look of a modern farmhouse or a barn style home, on a whole house or as a strong accent on gables and entries.
Get a Free Estimate -
Shake Siding
Fiber cement shake and shingle panels, straight edge or staggered, that give you the texture of cedar with none of the rot, cupping, or refinishing. A favorite on gables, dormers, and craftsman fronts above a lap field.
Get a Free Estimate -
Architectural Panel Siding
Large smooth panels set in a deliberate grid, with reveals or trim at every joint, for a crisp contemporary face. The layout does the design work, so we plan every seam around your windows and doors before a single panel is cut.
Get a Free Estimate
Why Choose James Hardie Fiber Cement?
Fiber cement gives your home a crisp, freshly finished look that lasts. It holds its color for years, comes in lap, panel, and shingle so you can create exactly the look you want, and shrugs off the rain, carpenter ants, and woodpeckers that wear other siding down. Weighing it against another material? Get in touch and we will walk you through both.
Get In Touch
Proud James Hardie Alliance Preferred Contractor
James Hardie builds its fiber cement for the climate it will live in, and it publishes exacting rules for how that board has to be cut, fastened, and flashed. We install to those rules on every wall, because a warranty only means something when the installation behind it was done the way the manufacturer wrote it.
James Hardie Fiber Cement Questions
See All FAQsIt sits in the middle of the range we install: more than vinyl, comparable to engineered wood, less than a properly detailed cedar wall. Square footage, story count, trim, and prefinished versus site painted all move it. The online estimator gives you a ballpark in about two minutes.
We install the James Hardie lines carried in this market and bring samples of the ones that suit your house and your neighborhood. [NEEDS INPUT] Confirm which product lines and finishes you want named on this page.
Prefinished board arrives with a factory applied, oven cured coating and a finish warranty behind it. Site painting costs less up front, gives you unlimited color choice, and needs attention sooner. On a house you intend to keep, prefinished usually wins on total cost.
Thirty to fifty years is the realistic range for the board itself when it is installed to spec and kept off the ground. The finish, not the board, is what you will maintain.
Very little. Rinse it once a year, keep vegetation off the wall, keep the grade clearance clear, and recaulk at trim joints when the sealant gets tired. That is the whole list.
With site painting, yes. With prefinished board you choose from the manufacturer palette, which is broad but not unlimited, and each line offers a custom color program at a price. We bring physical samples rather than asking you to pick from a screen.
Why Choose Sealed Siding?
The Best Choice for James Hardie Fiber Cement Siding Installation in Seattle
- Rot and pest proof: There is no food value in the board, so carpenter ants, termites, and woodpeckers move on to a neighbor's house.
- Noncombustible board: Fiber cement carries a Class A flame spread rating, which is why it turns up as a requirement in wildfire exposed areas and on tight urban lots.
- Holds a finish: Paint on properly primed fiber cement lasts far longer than paint on wood, and factory prefinished board comes with its own finish warranty.
- Installed to the schedule: Correct fastener type and spacing, six inches to grade, two inches to roofing, a quarter inch above trim, and flashed butt joints. That is what keeps the warranty alive.
Ready to see your home in James Hardie?
Free home estimate, real samples on your wall, and a written price you can compare. Tell us about the house and we will set up a time to come out, measure, and walk you through the options in person.
We install James Hardie fiber cement across King, Snohomish, and Pierce County, from Seattle and the Eastside out to the north and south ends. If your city is not listed here, ask. We very likely cover it.
Get StartedOur Process
Effortless and Expert James Hardie Fiber Cement Siding Installation
-
Step 1:
Consultation
and DesignWe start with a free walkthrough of your home to understand your goals, your budget, and the condition of the walls you have now. Our team guides you through profiles, colors, and trim details so your James Hardie fiber cement siding project is designed around your house before anything is ordered.
-
Step 2:
Material
SelectionChoose from the products and finishes we trust in this climate, with real samples held up against your own walls. We help you weigh profile, color, and finish so your James Hardie fiber cement siding project looks right from the street and holds up for decades.
-
Step 3:
Professional
InstallationOur crew handles every part of your James Hardie fiber cement siding project: tear off, repair, weather barrier, flashing, and finish work, all detailed to the manufacturer installation guide. Every wall we open is dried in the same day, and the site gets a magnetic nail sweep every evening.
-
Step 4:
Final
InspectionWhen the work is done, we walk every elevation with you and check each seam, flashing detail, and piece of trim against our standards. We make sure your James Hardie fiber cement siding project looks sharp, sheds water the way it should, and is ready for years of Puget Sound weather.
Other Top Services
Explore more siding solutions from Sealed Siding
-
The warm look of real wood grain in panels and lap, primed for any color you love and built to stay beautiful in our climate.
LP SmartSide Engineered Wood
-
Clean modern lines in deep, rich colors, laid out around your windows so the whole wall looks designed, not just covered.
Metal Siding
-
We rebuild damaged walls the right way and blend the new boards in so well you will never spot where the repair was.
Siding & Rot Repair
-
A complete exterior makeover in the material and color you love, from one crew, on one schedule, with one warranty.
Full Siding Replacement
Looking for design inspiration?
Get in touch for more info about our siding products:
Proudly Serving
- Seattle
- Bellevue
- Kirkland
- Redmond
- Renton
- Bothell
- Lynnwood
- Everett
- Issaquah
- Sammamish
- Kent
- Auburn
- Federal Way
- Tacoma
- Puyallup
- Marysville
- Shoreline
- Lake Forest Park
- Kenmore
- Edmonds
- Mountlake Terrace
- Mukilteo
- Woodinville
- Mercer Island
- Newcastle
- Medina
- Clyde Hill
- Hunts Point
- Yarrow Point
- Beaux Arts Village
- Duvall
- Carnation
- Snoqualmie
- North Bend
- Skykomish
- Tukwila
- SeaTac
- Burien
- Normandy Park
- Des Moines
- Covington
- Maple Valley
- Black Diamond
- Enumclaw
- Algona
- Pacific
- Milton
Learn Something New on Our Blog
See All Articles-
MaterialsWhat Is the Difference Between Vinyl and Fiber Cement Siding?
The two most common choices, compared on price, weight, fire, water, color, repairs, and how each one ages in a wet climate.
-
Cost
How Much Does It Cost to Replace Siding on a House?
What drives the number: wall area, material price per square foot, tear off, hidden rot, trim, and permits. Plus how to compare two bids fairly.
-
MaterialsHow Long Do Different Types of Siding Last?
Real service life for vinyl, James Hardie fiber cement, LP SmartSide engineered wood, cedar, and metal, plus the three things that decide whether you get it.
Ready to see your home in James Hardie?
Free home estimate, real samples on your wall, and a written price you can compare.